MATERIAL SAFETY DATA SHEET

  May be used to comply with OSHA's Hazard Communication Standard,
  29CFR 1910. 1200. Standard must be consulted for specific requirements.

   PINEFRESH

  MSDS NO. 166-1
Important: Do not leave any blank spaces. If required information is unavailable, unknown, or doesn't apply, so indicate.
       *N/A=No information available        *N/AP=Not Applicable

 

Section 1 - Company and Chemical Identification
BLIND INDUSTRIES AND SERVICES OF MARYLAND
3345 WASHINGTON BLVD
BALTIMORE, MD 21227
PRODUCT USE: ALL PURPOSE PINE SCENTED CLEANER 		EMERGENCY PHONE: 800-535-5053
PHONE: 888-322-4567
DATE: JANUARY 1, 2005
Section 2 - Hazardous Ingredients/Identity
Hazardous Component(s) (chemical & common name) OSHA
PEL		 ACGIH
TLV		 Other Exposure
Limits		 %
(optional)		 CAS
No.
Pine Oil Not established       8002-09-3
 
 
NPCMA-HMIS Rating:      Health - 1            Flammability - 0            Reactivity - 0            PPE - X
Section 3 - Health Hazard Identification
Acute: Chronic:
Eye or skin irritant Possible corneal damage
Signs and Symptoms of Exposure:
Redness, irritation, tearing of eyes, swelling.
Medical Conditions Generally Aggravated by Exposure:
 
Chemical Listed as Carcinogen
or Potential Carcinogen		 National Toxicology
Program		   Yes
   No X		 I.A.R.C   Yes
   No X		 OSHA   Yes
   No X
Section 4 - First Aid Measures
Routes of Entry and Emergency/First Aid Procedures
1. Inhalation:
Remove to fresh air. Treat any irritation symptomatically. Call a physician if irritation persists.
2. Eyes:
Immediately flush with low pressure water for 15 minutes. Remove Contact lenses. Call a physicians if irritation persist.
3. Skin:
Wash with soap and water.
4. Ingestion:
If conscious, drink large quantities of water. Do not induce vomiting. Call a physician.
Section 5 - Fire Fighting Measures & Data
Flash Point Method Used Flammable Limits
in Air % by Volume		 LEL
Lower		 UEL
Upper
None to 200°.F N/AP   N/AP N/AP
Auto-Ignition Temperature: Extinguisher Media:      
N/AP N/AP      
 
Special Fire Fighting Procedures:
N/AP
 
Unusual Fire and Explosion Hazards:
N/AP
 
DOT Hazard Classification:
N/AP
Section 6 - Accidental Release Measures
Steps to be Taken in Case Material is Released or Spilled:
Mop up with water and dispose as used cleaner.
Waste Disposal Methods (Consult federal, state, and local regulations):
May be disposed as used cleaning solution. Check local, state, and federal regulations.
Section 7 - Special Precautions, Handling, and Storage
Precautions to be Taken in Handling and Storage:
Keep in a covered area. Do not leave containers open.
Other Precautions:
Avoid all personal contact.
Section 8 - Special Protection Information/Control Measures
Respiratory Protection (Specify Type):
N/AP
Ventilation: Local Exhaust: Mechanical (General): Special: Other
  X      
Protective Gloves: Eye Protection:
Rubber or Neoprene Splashproof safety goggles
Other Protective Clothing or Equipment:
N/AP
Work/Hygienic Practices:
Wash hands after use and before eating, drinking, or smoking.
Section 9 - Physical & Chemical Characteristics
Boilling Point: Specific Gravity (H2O): Vapor Pressure (mm Hg): Vapor Density (Air=1):
212°F 1 N/A >1
Solubility in Water: Reactivity in Water:
Complete Nil
Appearance and Odor: Melting Point:
Green liquid with a pine odor. N/AP
Section 10 - Stability and Reactivity
Stability: Unstable Stable Conditions to Avoid:
    X N/AP
Incompatibility (Materials to Avoid):
N/AP
Hazardous Decomposition Products:
N/AP
Hazardous Polymerization: May Occur Will Not Occur Conditions to Avoid:
    X N/AP

 

Material Safety Data Sheet Forms Index