MATERIAL SAFETY DATA SHEET

  May be used to comply with OSHA's Hazard Communication Standard,
  29CFR 1910. 1200. Standard must be consulted for specific requirements.

   KNOCKDOWN

  MSDS NO. 151-3
Important: Do not leave any blank spaces. If required information is unavailable, unknown, or doesn't apply, so indicate.
       *N/A=No information available        *N/AP=Not Applicable

 

Section 1 - Company and Chemical Identification
BLIND INDUSTRIES AND SERVICES OF MARYLAND
3345 WASHINGTON BLVD
BALTIMORE, MD 21227
PRODUCT USE: CLEANER / DISINFECTANT 		EMERGENCY PHONE: 800-535-5053
PHONE: 888-322-4567
DATE: JANUARY 1, 2005
Section 2 - Hazardous Ingredients/Identity
Hazardous Component(s) (chemical & common name) OSHA
PEL		 ACGIH
TLV		 Other Exposure
Limits		 %
(optional)		 CAS
No.
N-Alkyl Dimethyl Benzyl Ammonium Chlorides   Not established   5.0 68391-01-5
N-Alkyl Dimethyl Ethylbenzyl Ammonium Chlorides   Not established   5.0 N/A
 
 
NPCMA-HMIS Rating:      Health - 2            Flammability - 0            Reactivity - 0            PPE - X
Section 3 - Health Hazard Identification
Acute: Chronic:
Irritating to skin and eyes. None established
Signs and Symptoms of Exposure:
Dryness or redness of skin or eyes.
Medical Conditions Generally Aggravated by Exposure:
Dermatitis or skin disorders from contact.
Chemical Listed as Carcinogen
or Potential Carcinogen		 National Toxicology
Program		   Yes
   No X		 I.A.R.C   Yes
   No X		 OSHA   Yes
   No X
Section 4 - First Aid Measures
Routes of Entry and Emergency/First Aid Procedures
1. Inhalation:
Unlikely - remove to fresh air.
2. Eyes:
Can be corrosive - flush with water for 15 minutes and seek medical attention.
3. Skin:
Can be corrosive - flush with plenty of water.
4. Ingestion:
Drink large amounts of milk, gelatin, eggwhites - seek immediate medical attention.
Section 5 - Fire Fighting Measures & Data
Flash Point Method Used Flammable Limits
in Air % by Volume		 LEL
Lower		 UEL
Upper
None N/A   N/A N/A
Auto-Ignition Temperature: Extinguisher Media:      
N/A N/A      
 
Special Fire Fighting Procedures:
N/A
 
Unusual Fire and Explosion Hazards:
N/A
 
DOT Hazard Classification:
Not regulated
Section 6 - Accidental Release Measures
Steps to be Taken in Case Material is Released or Spilled:
Spills over 5 gallons must be collected & disposed of according to regulations, smaller may be flushed.
Waste Disposal Methods (Consult federal, state, and local regulations):
Incineration or approved landfill in accordance with federal, state, and local regulations.
Section 7 - Special Precautions, Handling, and Storage
Precautions to be Taken in Handling and Storage:
Keep out of reach of children. Wear eye and skin protection when pouring, pumping, or transferring liquid.
Other Precautions:
Avoid contamination of ground water, ponds, and streams.
Section 8 - Special Protection Information/Control Measures
Respiratory Protection (Specify Type):
None normally required.
Ventilation: Local Exhaust: Mechanical (General): Special: Other
  Adequate      
Protective Gloves: Eye Protection:
Rubber Splash goggles or face shield
Other Protective Clothing or Equipment:
N/A
Work/Hygienic Practices:
Avoid eye and skin contact. Wash hands before eating, smoking, or touching eyes and mouth.
Section 9 - Physical & Chemical Characteristics
Boilling Point: Specific Gravity (H2O): Vapor Pressure (mm Hg): Vapor Density (Air=1):
210°F ± 2° 1.05 N/A N/A
Solubility in Water: Reactivity in Water:
Complete None
Appearance and Odor: Melting Point:
Clear odorless liquid N/A
Section 10 - Stability and Reactivity
Stability: Unstable Stable Conditions to Avoid:
    X N/A
Incompatibility (Materials to Avoid):
N/A
Hazardous Decomposition Products:
CO1 and CO2
Hazardous Polymerization: May Occur Will Not Occur Conditions to Avoid:
    X N/A

Material Safety Data Sheet Forms Index