BISM logo

Blind Industries and Services of Maryland


PRODUCT INFORMATION SHEET

DURA GLOSS
Description:     Once dry, this true commercial grade floor finish can be damp mopped or even scrubbed with a detergent solution, without removing the finish or even affecting its gloss. Modern acrylic polymers crosslink to form a high gloss finish that resists scuffing, stains and black marks and protects the floor from traffic.

For use on vinyl, vinyl asbestos, asphalt tile, rubber, linoleum, tile and other floors.
 
How to Use:     May be applied over other hard, non-wax finishes. But for assured results, the old brand of polish should be removed, and the new finish applied to a clean, dry floor.
  1. Apply finish in straight, even strokes that will cover fully, but not so liberally as to run into spots.
  2. Allow to dry completely. Do not re-work finish while it is drying.
  3. When dry, an additional coat, or coats, may be applied if needed. Apply each succeeding coat a little less liberally than the previous one.
Future Care:     Regular dry mopping, damp mopping, and burnishing will extend durability. Use a compatible restorer when high speed polishing. Worn or dirty areas may be cleaned and spot coated without re-coating the entire floor.
 
Specifications:    
Appearance Milky liquid
Fragrance Characteristic
Specific Gravity 1.020 ± 0.005
Density 8.51 ± 0.05 lb/gal
Boiling Point Near 2120F
pH 8.5 ± 0.5
Flash Point None to boiling 0F
Stability One year minimum

 

This sheet is not an M.S.D.S., nor does it satisfy the
requirements to have one. All information on this
sheet is believed to be accurate, but no warranty is
expressed or implied. The product described hereon
is for use only by trained professional cleaning personnel.